|25105||6-PIECE MICRO CARVING SET
The Finest Micro Size Carving Tools You'll Find Anywhere. Our 3mm Micro Carving Set is made of the finest quality tool steel, fully sharpened and honed to an incredibly sharp edge. You'll be amazed at the intricate cuts possible. These tools are a must if you're into anything that requires small, intricate cuts in wood...decoy carving, ship modeling, dollhouse miniatures, etc. Carvers have lacquered hardwood handles and include one single bevel chisel edge, one double bevel chisel edge, one skew chisel edge, two gouges and one parting tool (V shape). 4-1/4 inches long. 3mm tips.
|60728||PANEL SCRIBER FOR PLASTIC MODELS
Use our Panel Scriber for making realistic looking recessed panel lines on models. Other scribers just move the plastic so you get a mound on the side of the line like a plowed field. Ours actually removes a thin hair of plastic without distorting the plastic. Made of stainless steel with a knurled no-slip handle. Has scribers on both ends so it will last twice as long. Will work equally as well on half hard brass and aluminum. 1/4 inch dia. x 6 inches long.
There are others available, but this is the only one we've tested that really works! No other tool smooths glue seams or removes parting lines and flash better than our Seam Scraper. The 3 super sharp cutting edges on the double-ended scraper blade are precision ground tool steel. The collet in the steel handle allows you to slide the scraper in and out to adjust for the amount of exposure you need. 2-3/4 inch long scraper blade. 4-1/2 inch long handle. Also deburrs aluminum, brass and other soft metals.
|81661||5-PIECE CARVING SET
Carving Set For Foam, Clay, Putty and More. Carving Set includes 5 double-ended stainless-steel carvers with round, triangular, square, tear-drop and needle-point tips that shape balsa foam easily and accurately. Sharp cutting edges and knurled gripping surfaces give you the control necessary for precision pattern and model making. Each carver is 7 inches long. Also excellent for use with clay, wax, and epoxy putty (such as Milliput).
|82328||5-PIECE BURNISHING SET
Burnishing Tool Transfers Lettering, Assures Bleed-Free Masking, Applies Bare Metal Foil, and More. Apply the smallest dry transfer lettering to a model boxcar. Rub down broad areas of masking material for clean, bleed-free edges on a model hot rod paint job. Work adhesive-backed Bare Metal Foil into and around the nooks and crannies of a scale aircraft engine. Whatever job you're doing, this burnishing tool gets it done quickly and accurately. Includes 5 inch aluminum handle with knurled grip and collet, plus 4 tips shown.
|82709||2mm PLASTIC MODELER'S CHISEL
Special Narrow Chisel Removes Plastic Details You Don't Want. Upgrade your injection molded plastic models by removing the unsightly, out-of-scale details manufacturers sometimes include. Now you can eliminate handrails, rivet heads, seam lines, chrome trim, hood ornaments and other unwanted details easily. The 2mm wide, hand ground cutting edge has slightly rounded corners so you won't gouge adjacent areas. And the no-slip handle and hefty feel give you precise control over the cutting force. Made exclusively for Micro-Mark of polished, surgical quality stainless steel. Ideal for use on miniature woodworking projects as well. Approximately 6-1/2 inches long.
|83252||MINI SCRAPERS (SET OF 4)
Mini Scraper Set for Creating Delicate Details. Four detailing tools that cut on the pull-stroke to scribe, scrape and shape intricate details into wood, clay, resin, wax and plaster. Drop-forged and hand-ground in surgical stainless steel with 6 inch long grooved octagonal handles for sure grip. Includes vinyl storage wallet.
|83253||MINIATURE CHISELS (SET OF 7)
Miniature Chisel Set for Models and Crafts. Set of 7 sharply honed miniature chisels for carving and shaping precise, intricate details into model surfaces. Made of surgical quality mirror-finish stainless steel with 6 inch long grooved octagonal handles for sure grip. Includes convenient storage wallet.
|84446||CORDLESS POWERED DETAIL ENGRAVER
Cordless Powered Detail Engraver You Use Like a Pen. Our high-speed engraving tool lets you carve and engrave the finest details in metal, wood, plastic and glass. And, because it's so lightweight (just 2 ounces), you'll have more control than you ever thought possible. Beautifully finished machined aluminum barrel includes finger-tip On-Off push button switch; holds two AAA cells (included) for cordless power. Set-screw-type 3/32 inch chuck holds miniature diamond engraving bit (also included). Packed in a handsome molded gift case. Color may vary.
Please note price and availability are subject to change.