Hobby-Worx Logo
Header01

Home     Product Lists     Order Form     Contact Us     Links     Show Schedule

"Serious stuff for the model railroad buff"

"Please Note"

Due to the fluctuating Canadian dollar and Micro-Mark's recent price adjustments, we ask that our customers simply email us with their orders.
And we will quickly email back your quote.
Thank you for your understanding.


Power Tool Accessories

Accessories for Drills

14260 UNIVERSAL FLEX SHAFT

Turns Any Rotary Tool, Drill Press or Power Drill into a Flexible Shaft Machine. Our Universal Flex Shaft lets you use your older model rotary tool, hand drill or drill press as a flexible shaft machine (for Dremel models 275, 285, 300, 395, 595, 398, 7800 and FreeWheeler, order our item No.50352 Flexible Shaft). Light, slim, pen-size hand piece gets you into the tightest spots. Accepts all rotary accessories and drill bits from 1/32 inch to 1/8 inch. Drive end attaches to any 3/32 inch collet (our item No.38251, sold separately) or drill chuck. Includes 4 collets and angle wrench. Bronze bearings let you work at speeds up to 20,000 rpm. 31 inches long. Note: When using flex shafts with rotary tools, we recommend you use No.84706 Flex Shaft Stand.
14260
82281 CENTER FINDER FOR ROUND STOCK

Special Indicator Locates Drill Chucks Exactly on Center. Never drill off-center holes again...use our Center Finder to quickly and easily position your drill press chuck directly above the exact center of a round workpiece. Indicator amplifies the slightest misalignment so you can adjust before drilling. 3/8 inch shank fits larger drill presses.
82281
83411 8 INCH DIGITAL READOUT FOR MACHINE TOOLS

Saves Time, Improves Accuracy. Digital readout installs on your lathe, milling machine or other machine tool to display the exact location of the carriage, spindle or milling table. The large, easy-to-see Liquid Crystal Display reads directly in inches or millimeters up to 8 inches. Eliminates the counting of dial turns and errors due to lead-screw backlash. Re-zeroes at any location. Includes on/off, zero and inch/mm buttons, plus battery and instructions. Resolution .0005 inch. Note: Due to the wide range of applications for this device, installation is left up to the purchaser.
83411
84364 STEP CLAMP SET FOR X-Y TABLE

Beautifully cast and plated step blocks and clamp bars adjust to the height you need to clamp workpieces to the No.82389 X-Y table attachment (sold separately). Blocks are 1 inch x 5/8 inch x 5/8 inch thick. Bars are 1-9/16 inch long x 5/8 inch wide x 5/16 inch thick. Includes 2 each: step blocks, clamp bars, studs, washers and nuts. Packed in a compartmented, varnished wood storage box.
84364
84519 MINIATURE DIGITAL LEVEL

2-in-1 High-Precision Miniature Digital Level.
• Measures Exact Angles of Machine-Tool Set Ups
• Measures Grades with Ultra Precision.
Carpenter levels are just too large and inaccurate for machine set-up, and too clumsy for measuring model railroad track grades and superelevation. So, we encased our high precision digital level in a compact housing that's only 2 inches square by 1 inch deep. At the press of a button, the large LCD reads the relative angle between machine surfaces or the percent grade from sea level. Embedded magnets attach it securely to cast-iron/steel surfaces for hands-free measurement. Range: 0 to 45 degrees/100%. Readability: 0.05 degress/0.01%. Hold button remembers last reading. Housing made from durable CNC-machined, satin-finish alloy. Includes battery and auto shut-off battery saver.
84519

Brushes and Buffers

15114 BRASS BRUSH, 7/8 INCH DIA.

Brass brush won't scratch soft metals. Brush shanks vary...1/8 inch or 3/32 inch.
15114
38207 WIRE WHEEL BRUSH

Small, versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch.
38207
38208 WIRE CUP BRUSH

Small, versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch.
38208
38209 WIRE END BRUSH

Small versatile steel brush used for efficiently removing rust and corrosion, and for polishing metal surfaces. Brush shanks vary...1/8 inch or 3/32 inch.
38209
38210 BRISTLE WHEEL BRUSH

For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch.
38210
38211 BRISTLE CUP BRUSH

For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch.
38211
38212 BRISTLE END BRUSH

For cleaning and polishing silverware, jewelry and metal surfaces. Ideal for hard-to-reach places. Brush shanks vary...1/8 inch or 3/32 inch.
38212
60736 WOVEN ABRASIVE REPLACEMENT WHEEL

3 inch dia. woven abrasive wheel designed for use with No.60730 Miniature Grinder. 3/4 inch wide, 10mm hole.
60736

Burrs and Cutters

14451 TUNGSTEN CARBIDE CUTTER, FINE (1/2 INCH x1/2 INCH, CONE SHAPE, 1/8 INCH SHANK)

Tungsten Carbide Cutters Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses.
14451
38185 SOLID CARBIDE CUTTER (1/8 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
38185
38193 SOLID CARBIDE CUTTER (1/8 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
38193
60474 MICRO CUTTERS, 1/32 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4)

These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4.
60474
60475 MICRO CUTTERS, 3/64 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4)

These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4.
60475
60476 MICRO CUTTERS, 1/16 INCH DIA. HEAD (3/32 INCH SHANK, SET OF 4)

These high speed, small engraving cutters are ideal for power engraving intricate details in wood, fiber, plastic and soft metals. 3/32 inch shanks fit Dremel and Micro-Mark high speed grinders and our power engraving tool. Set of 4.
60476
60671 SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60671
60672 SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60672
60674 SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60674
60676 SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60676
60677 SOLID CARBIDE CUTTER (1/4 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60677
60679 SOLID CARBIDE CUTTER (1/16 INCH DIA., 1/8 INCH SHANK)

Carbide cutters last up to twenty times longer than steel cutters, so in the long run you'll save money. Cutter has 1/8 inch shank to fit Dremel and other rotary tools. Use to shape all materials except hard steel.
60679
60919 6-PIECE TUNGSTEN CARBIDE CUTTER SET, FINE

Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. 6-piece Set includes 1 each of the following Fine Grit Tungsten Carbide Cutters: No.14451, 1/2 inch x 1/2 inch; No.14453, 1/2 inch x 1/2 inch; No.14455, 5/16 inch dia.; No.14457, 5/8 inch dia.; No.14459, 1/4 inch x 1/2 inch; No.14461, 1/8 inch x 3/4 inch
60919
60920 6-PIECE TUNGSTEN CARBIDE CUTTER SET, COARSE

Last Almost Forever. You've never seen anything like these incredible cutters. They're made of virtually indestructible tungsten carbide welded to steel shanks. They'll last for years and they won't load up, break down or overheat like ordinary steel cutters. Use on all woods, fiberglass, stone, ceramic or plastic (not recommended for use on metal). 1/8 inch shanks fit in hand drills, rotary tools and drill presses. 6-piece Set includes 1 each of the following Coarse Grit Tungsten Carbide Cutters: No.14450, 1/2 inch x 1/2 inch; No.14452, 1/2 inch x 1/2 inch; No.14454, 5/16 inch dia.; No.14456, 5/8 inch dia.; No.14458, 1/4 inch x 1/2 inch; No.14460, 1/8 inch x 3/4 inch
60920
80919 20-PIECE DIAMOND COATED MICRO BURR SET (1/8 INCH SHANK)

Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Includes a plastic storage case. Standard Micro Burr Set includes 20 different shapes with cutting diameters up to 1/8 inch.
80919
81094 8-PIECE JUMBO DIAMOND COATED MICRO BURR SET

Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Jumbo Diamond Coated Micro Burr Set includes 8 different shapes with cutting diameters up to 1/4 inch, plus plastic storage case.
81094
81418 DIAMOND CORE DRILL, 3/8 INCH DIA. (1/8 INCH SHANK)

For Hard-to-Drill Materials. Diamond Core Drills are the best tools for drilling smooth, clean holes in glass, ceramics, stone, fiberglass and other hard materials. 1/8 inch shank fits all rotary tools.
81418
81419 DIAMOND CORE DRILL, 1/4 INCH DIA. (1/8 INCH SHANK)

For Hard-to-Drill Materials. Diamond Core Drills are the best tools for drilling smooth, clean holes in glass, ceramics, stone, fiberglass and other hard materials. 1/8 inch shank fits all rotary tools.
81419
81957 TYPHOON BURR, COARSE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81957
81958 TYPHOON BURR, FINE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81958
81959 TYPHOON BURR, COARSE (1/8 INCH DIA. x 3/4 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81959
81960 TYPHOON BURR, FINE (1/8 INCH DIA. x 3/4 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81960
81961 TYPHOON BURR, COARSE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81961
81962 TYPHOON BURR, FINE (1/4 INCH DIA. x 1/2 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81962
81965 TYPHOON BURR, COARSE (3/4 INCH DIA. x 1/8 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81965
81966 TYPHOON BURR, FINE (3/4 INCH DIA. x 1/8 INCH, 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
81966
82260 30-PIECE DIAMOND COATED MICRO BURR SET

Smooth and Shape Almost Anything. Burrs coated with real industrial diamonds let you grind, engrave, smooth and shape wood, plastic, metal...even hardened steel and glass. They're also used for sharpening steel and carbide tipped cutting tools. Shanks are 1/8 inch so they'll fit Dremel and other high speed rotary tools. Jumbo Diamond Coated Micro Burr Set includes 8 different shapes with cutting diameters up to 1/4 inch, plus plastic storage case.
82260
82657 TYPHOON BURR, COARSE (1/2 INCH DIA. x 3/8 INCH; 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
82657
82658 TYPHOON BURR, FINE (1/2 INCH DIA. x 3/8 INCH; 1/8 INCH SHANK)

Remove Stock Quickly. Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.
82658

Chucks and Collets

15264 UNIVERSAL 3-JAW CHUCK FOR ROTARY TOOLS, 1/64-1/8 INCH CAPACITY (1/8 INCH SHANK)

Tired of changing collets on your rotary tool every time you change the bit? If you are, then you'll love our keyless 3-jaw chuck. Includes special adapter with 1/8 inch shank that fits into any rotary tool's 1/8 inch collet. Holds drill bits and all accessories from 1/64 inch to 1/8 inch. Recommended for speeds up to 10,000 rpm.
15264
38250 1/8 INCH COLLET FOR DREMEL ROTARY TOOLS

For all Dremel rotary tool models.
38250
38251 3/32 INCH COLLET FOR DREMEL ROTARY TOOLS

For all Dremel rotary tool models.
38251
38252 1/16 INCH COLLET FOR DREMEL ROTARY TOOLS

For all Dremel rotary tool models.
38252
38253 1/32 INCH COLLET FOR DREMEL ROTARY TOOLS

For all Dremel rotary tool models.
38253
81049 SCREW-ON 3-JAW KEYLESS CHUCK FOR ROTARY TOOLS, 1/64-1/8 INCH CAPACITY

3-Jaw Keyless Chuck screws directly on threaded portion of motor shaft for fast replacement of bits and accessories with 1/64 inch to 1/8 inch shanks.
81049
81852 MINI CHUCK FOR CORDLESS SCREWDRIVER (1/4 INCH HEX SHANK)

Special Chuck Fits Cordless Screwdrivers for Slow Speed Drilling. Also works as an adapter for your oversized drill chuck, quickly converting it for precise drilling with micro size bits. Most drills and rotary tools spin too fast for working in plastic and for tiny detail work. Special chuck has 1/4 inch hex shank that fits your slow turning Dremel®, Black and Decker®, Craftsman®, or other cordless screwdriver to solve this problem. Take advantage of the quick-change feature of the 1/4 inch shank...buy several chucks and keep your most-used drill bits ready to go. Holds drill bits from 1/8 inch to No.59.
81852
82507 TAILSTOCK CHUCK, MT-2

Tailstock Chuck with MT2 shank. Holds drills 1/32 inch to 1/2 inch diameter. Includes key.
82507
82512 3-JAW SELF-CENTERING CHUCK

Body dia. = 3.150 inches. Internal jaws clamping range = .079 to .866 inch. Internal jaws jamming range = .984 to 2.756 inches. External jaws clamping range = .866 to 2.480 inches. Approx. 5/8 inch dia. thru-hole.
82512
82540 MICRO DRILL CHUCK, No.61 - No.80 (1/8 INCH SHANK)

Locks into the collet of any rotary tool. Will also work with hand drills and drill presses. Holds any small size drill bit from number 61 (.039 inch) to number 80 (.0135 inch). Closes to 0. Recommended for use up to 10,000 rpm only.
82540
82746 TAILSTOCK CHUCK, MT1 (1/32 - 3/8 INCH DIA. CAPACITY)

Tailstock Chuck with MT1 shank. Holds drills 1/32 inch to 3/8 inch diameter.
82746
82752 HEADSTOCK CHUCK FOR MINI WOODTURNERS' LATHE, MT-1 (2 INCH CAPACITY)

Chuck with MT1 shank installs in headstock of No.82565 Mini Wood Lathe and has reversible jaws to hold stock up to 2 inches in diameter.
82752
83164 ROTATING TAILSTOCK CHUCK, MT2 (1/2 INCH CAPACITY)

Live 3-Jaw Tailstock Chuck rotates on smooth, sealed bearing to support small diameter stock while turning in the lathe. Use when there is insufficient room for follower rest. Works great for truing armatures and flywheels mounted on small diameter motor shafts. MT2 shank fits a wide variety of machines. Includes chuck key. 1/2 inch capacity.
83164
83266 SELF-CENTERING 3-JAW CHUCK

Larger capacity self-centering 3-jaw chuck with 7/8 inch dia. bore allows full use of hole through MicroLux Lathe spindle. Body dia. = 3.937 inches. Internal jaws clamping range = .078 to 1.181 inches. Internal jaws jamming range = 1.181 to 3.543 inches. External jaws clamping range = 1.181 to 3.150 inches.
83266
83371 SELF-CENTERING 4-JAW CHUCK

4-jaw self-centering chuck with 5/8 inch dia. bore. Body dia. = 3.150 inches. Internal jaws clamping range = .079 to .866 inch. Internal jaws jamming range = .984 to 2.756 inches. External jaws clamping range = .866 to 2.480 inches. Includes internal and external jaws and key.
83371

MicroLux Attachments and Accessories

15117 MICROLUX DRILL PRESS DRIVE BELT

For use with No.81631 MicroLux Drill Press.
15117
15118 DRILL PRESS VISE, 1-1/4 INCH CAPACITY

Grooved base fits on MicroLux No.81631 Standard Duty Drill Press sliding gauge or mount with clamps to No.82389 X-Y Table. Made of cast aluminum with easy grip plastic knob and steel screw. Jaws are 2 inches wide with grooves for holding round stock. Also has a handy anvil top with a cast-in hole for supporting micro size parts while drilling. Jaws open to 1-1/4 inches.
15118
15237 REPLACEMENT POWER PLANE CUTTER

Replacement cutter fits No.15228 MicroLux Power Plane.
15237
15238 3-JAW KEYLESS CHUCK, 1/64 INCH - 1/8 INCH CAPACITY

Use in place of collets for quicker change of bits. 1/64 to 1/8 inch capacity. Designed for use with #82376 MicroLux Right Angle Disk Sander/Drill and No.15230 MicroLux High Speed Drill/Grinder.
15238
15239 MICROLUX 80 GRIT SANDING BELT

Designed for use with No.15299 MicroLux Belt Sander.
15239
15240 MICROLUX 120 GRIT SANDING BELT

Designed for use with No.15229 MicroLux Belt Sander.
15240
15244 FINE JIGSAW BLADES FOR MICROLUX SAWS (PKG. OF 10)

Designed for use with No.15226 MicroLux Jigsaw/Scroll Saw and No.82088 MIcroLux Cross Saw.
15244
15247 SANDPAPER FOR MICROLUX No.15225 ORBITAL SANDER (ASST. GRITS, 10 SHTS)

10 sheets peel-and-stick sandpaper in assorted grits for use with No.15225 MicroLux Orbital Sander.
15247
15248 EXTRA SANDER PAD FOR MICROLUX No.15225 ORBITAL SANDER

Sander pad snaps on/off. Lets you keep different grits mounted and ready to use. Designed for use with No.15225 MicroLux Orbital Sander.
15248
15252 DIAMOND GRINDING BLADE

For micro filing and grinding of almost any material. Designed for use with No.15226 MicroLux Jigsaw/Scroll Saw and No.82088 MicroLux Cross Saw.
15252
70224 RIPPING GAUGE SET

Trial and error cutting of narrow stripwood is time consuming and costly. Our Brass Ripping Gauges save you time and money. Just place the correct width gauge next to the blade and slide the rip fence up to it. Remove the gauge and you've got the exact spacing you need within .003 inch. Set includes: 1/16 inch, 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch and 1/2 inch width gauges. For other widths, use 2 or more gauges in combination. All gauges are approx. 4 inches long.
70224
80467 ACCURISER II

For the MicroLux Tilt Arbor Saw
Gives You Close Tolerance, Super-Accurate Rip Cuts. Rip stock to precise tolerances with this vernier adjustable rip fence. Has a self-aligning T-square design with positive lock that holds it perfectly parallel to the blade. The sliding face of the fence adjusts in .005 inch increments so your cuts will be more accurate than you ever thought possible. Order yours today and experience the difference precise cuts can make to all your miniature projects.
80467
80468 SLIDING TABLE FOR MICROLUX TILTING ARBOR TABLE SAW

Sliding Table Makes Precise Crosscuts. Guides on the bottom of the table slide in the grooves of the saw. The wide fence gives your work more support for 90 degree cuts. The triangles we supply give you perfect 30 degree, 45 degree and 60 degree cuts without resetting the miter gauge each time you change the angle of cut. Recommended for cuts in material up to 1/2 inch thick. Table is 10 inches x 12 inches. Fence is 1-1/2 inch high. Note: Sliding Table is designed for use with No.80463 Tilting Arbor Table Saw only. Not for use with No.50304 Miniature Table Saw.
80468
80605 TAPER JIG

This beautifully machined Taper Jig is used whenever you need to make a wood or plastic part with an angle cut on its long dimension. Adjusts easily to any taper. Made of machined aluminum and steel with a nylon handle. 6 inches long.
80605
80793 MICROLUX TABLE SAW DRIVE BELT (SIZE MXL FOR OLDER MODELS)

Size MXL (1/4 inch wide) for older models. Please check old drive belt before ordering.
80793
80850 MICROLUX TABLE SAW DRIVE BELT (SIZE XL FOR NEWEST MODELS)

Size XL (3/8 inch wide) for our newest models. Please check old drive belt before ordering.
80850
80898 FEATHERBOARD AND HIGH FENCE ATTACHMENT SET

Make Your MicroLux Table Saw More Versatile. The support provided by a high fence allows you to make cuts that are safer, easier and more accurate. And you can mount jigs and attachments to a high fence that won't fit on a standard fence.Here's what you'll get:
2 inch high x 10 inch long extruded aluminum rip fence. This attachment mounts to your existing fence in seconds with 3 clamping screws. It supports stock vertically, allowing you to make dado, rabbet, tenon and other edge cuts. You can also use home made push sticks, hold downs and other cutting jigs that slide along or clamp to the top edge and face of the fence to provide safer, more accurate cuts. Vertical featherboard. Mounts to high fence with C clamp (included). Flexible fingers hold stock tight against saw table and help prevent kick-back. Made of laser cut hardwood and steel. Horizontal featherboard. Mounts in miter gauge slot with special expanding clamp. Flexible fingers hold stock tight against rip fence. Adjustable for different stock widths. Made of laser cut hardwood, aluminum and steel.
80898
80899 REPLACEMENT HORIZONTAL FEATHERBOARD

Laser cut wood fingers only. Holds stock tight against rip fence. Made of hardwood.
80899
80900 REPLACEMENT VERTICAL FEATHERBOARD

Laser cut wood fingers only. Mounts to high fence. Flexible fingers hold stock tight against saw table and help prevent kick-back. Made of hardwood.
80900
80996 DADO / SLOT WASHERS

For the Microlux Saw. Special washers mount behind the blade to cut perfect 1/16 inch, 3/32 inch, 1/8 inch and 3/16 inch wide dado slots without making tedious trial and error adjustments. For use with No.80464 80 Tooth Standard Blade only.
80996
81387 EASY-MOUNT BENCH BRACKET FOR MICROLUX SAWS

This specially formed steel bracket attaches to the bottom of your MIcroLux saw, providing a quick and simple way to mount it to a work table. Two screw-type clamps secure the bracket to table tops up to 2 inches thick. Foam pads protect the table top surface. Includes hardware and instructions for mounting saws No.80463, No.60514 and No.50304.
81387
82211 COOLING SYSTEM FOR No.82203 VARIABLE SPEED BAND SAW

A cooling system is required when cutting stone, tile, ceramics, gems, minerals, glass and other hard materials with your band saw and a diamond blade. Reservoir and adjustable valve dispense water directly on the cut to lubricate and cool the blade, preventing overheating and premature blade failure. Unlike other water bath machines, ours won't splash water all over you and your workbench. Includes reservoir, valve, tubing, gasket, 12 inch x 16 inch collection tray and hardware.
82211
82377 PEEL-AND-STICK SANDING DISK SET, 2-3/8 INCH DIA. (3 GRITS, 2 EACH)

2 each of 60, 120 and 240 grit peel-and-stick sanding disks. 2-3/8 inches dia. Designed for use with No.82376 MIcroLux Right Angle Disk Sander/Drill.
82377
82378 FLEXIBLE DISK MOUNTING WHEELS, 2-3/8 INCH DIA. (SET OF 3)

Flexible disk mounting wheels for finishing curved surfaces (very useful on gourds). Lets you keep sanding disks of different grits mounted and ready to use. Set of 3. Designed for use with No.82376 MicroLux Right Angle Disk Sander/Drill.
82378
82378 SEMI-RIGID DISK MOUNTING WHEELS, 2-3/8 INCH DIA. (SET OF 3)

Semi-rigid disk mounting wheels for finishing curved surfaces (very useful on gourds). Lets you keep sanding disks of different grits mounted and ready to use. Set of 3. Designed for use with No.82376 MicroLux Right Angle Disk Sander/Drill.
82378
82389 MICROLUX X-Y TABLE ATTACHMENT

Increases Accuracy by 30 Times! The MicroLux X-Y Table Attachment increases the accuracy of hole locations to within .0005 inch of true position -- 30 times better than 'eyeball' center-punching! Table positioning is controlled in the X and Y directions by smooth-acting zero-adjustable handwheels. Adjustable gibs in dovetail guides maintain accuracy and eliminate side play even after many years of use, and special retractable covers keep the lead screws free of chips. Although designed specifically for both MicroLux Drill Presses, our table attachment can be easily mounted to other machines. Includes sliding front scale, hold-down clamps, mounting hardware and template, and hardware for mounting the No.15118 Vise (sold separately). Made of steel, aluminum and engineering polymers.
Specifications (inches):Table Size: 8-1/4 L x 2-3/4 D
Overall Size: 10-1/2 L x 7-1/2 D x 1-11/16 H
Base Size: 3-3/4 x 5-1/2
X Direction Travel: 5-1/4
Y Direction Travel: 1-3/4
Dial Graduations: .001; .050 per revolution.
82389
82689 ROCKER TOOL POST, 5/8 INCH CAPACITY

Rocker Tool Post lets you adjust position of tool bit to exact center of workpiece without shimming. Compensates for worn or resharpened cutting tools. Double-sided to hold two bits. Indexes on compound rest. 5/8 inch capacity.
82689
82960 EXTRA DRIVE BELT FOR No.82959 VARIABLE SPEED DRILL PRESS

Designed for use with No.82959 MicroLux Heavy Duty Variable Speed Drill Press with Digital Depthfinder.
82960
82996 DRIVE BELT FOR MICROLUX 8 x 12 WOOD LATHE

Fits MicroLux No.82995 8 x 12 Wood Lathe.
82996
84051 STRAIGHTEN IT

Put a New Edge on Your Work. Recover unevenly cut wood or put a new edge on a part with our Straighten It table saw guide. Use the three thumb screws (included) to secure the workpiece to the extruded aluminum frame and run through your saw. The result is a perfectly straight edge from which to measure and make new parts. Holds material up to 3/4 inch thick. Note: Uses same fence as our No.80898 Featherboard and Fence Set.
84051

Rotary Tool Attachments and Accessories

50357 RIGHT ANGLE DRIVE FOR ROTARY TOOLS

Right Angle Drive attaches in seconds to Dremel models 275, 285, 300, 395, 595, 398, 7800, 800, 400XPR and 4000. It will drill, cut, sand and grind in places you never could before. Has a tough ABS housing, hardened metal gears and lifetime lubricated ball bearings.
50357
83002 DREMEL LITHIUM-ION CORDLESS 10.8v BATTERY PACK

Extra 10.8v Lithium-Ion battery designed for use with No.83001 Dremel Lithium-Ion Cordless Rotary Tool. Keep an extra battery charged up for uninterrupted use of your rotary tool.
83002
83400 CARBIDE SHAPING WHEEL, COARSE (1-1/4 INCH DIA., 40-46 GRIT; 1/8 INCH SHANK MANDREL)

Works Hard, Runs Cool, Stays Clean. Creates compound curves in wood, fiberglass, laminates, plastic, leather and styrofoam. Contoured 1-1/4 inch dia. perforated steel wheel stays cool and doesn't clog up. Carbide grit is fast cutting and long lasting. Coarse (40 - 46) grit. Includes mandrel with 1/8 inch dia. shank.
83400
83401 CARBIDE SHAPING WHEEL, FINE (1-1/4 INCH DIA., 120 GRIT; 1/8 INCH SHANK MANDREL)

Works Hard, Runs Cool, Stays Clean. Creates compound curves in wood, fiberglass, laminates, plastic, leather and styrofoam. Contoured 1-1/4 inch dia. perforated steel wheel stays cool and doesn't clog up. Carbide grit is fast cutting and long lasting. Coarse (40 - 46) grit. Includes mandrel with 1/8 inch dia. shank.
83401
83403 CARBIDE CUTTING / SHAPING WHEEL (60 GRIT; 1/8 INCH SHANK MANDREL)

Works Hard, Runs Cool, Stays Clean. Flat disk Carbide Cutting/Shaping Wheel has 60 grit abrasive on both its outer edge and on its flat face, making it ideal for both fast cutting and shaping. Includes mandrel with 1/8 inch dia. shank.
83403
83453 DREMEL WORKSTATION

combines the operation of a drill press, rotary tool holder and flex shaft machine in one space-saving attachment. Headstock rotates to perform angle drilling, and holds rotary tool at convenient angle for sanding and shaping. 6 inch square metal work surface, 4 inch throat, 6 inch clearance under collet, slotted table for guides and hold-downs. Telescoping column extends to 29 inches high for flex shaft use. Includes calibrated depth stop, storage system for accessories and FlexLite attachment fitting. Holds Dremel rotary tool models 275, 285, 395, 398, 595, 780, 800, 300 series, plus 400XPR and 4000. Note: Dremel Rotary Tool, No.82546 Quick-Jaw Vise, No.83238 Dremel FlexLite and No.83239 Workstation Drill Bit Set are shown attached, but are not included.
83453
84285 ROTARY TOOL BIT HOLDER

A New Spin on Rotary Tool Bit Holders. Our rotary bit holder has 114 holes that neatly store your tool bits in full view for easy identification. Ball-bearing base lets you quickly spin to the tool bit you need...saves time and aggravation. Large center well (2-3/4 inch diameter x 3 inches deep) holds glue bottles, brushes, files, pliers and more. Keeps your workbench well-organized with little effort. Overall size: 7 inches dia. x 4 inches high; holes are 1/8 inch diameter.
84285

Routers

38224 STRAIGHT ROUTER BIT, 1/8 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38224
38225 STRAIGHT ROUTER BIT, 3/16 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38225
38226 STRAIGHT ROUTER BIT, 1/4 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38226
38227 VEINING ROUTER BIT, 1/4 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38227
38228 VEINING ROUTER BIT (ROUND), 1/4 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38228
38229 V-GROOVE ROUTER BIT, 1/4 INCH (1/8 INCH SHANK)

For routing, inlaying, mortising in wood and other soft materials. 1/8 inch shank.
38229
60485 DREMEL SHAPER TABLE ATTACHMENT

Dremel Shaper Table Attachment lets you make miniature molding, grooves, slots and decorative edges with your Dremel rotary tool. Injection molded with router bit guard, adjustable guide fence and depth-of-cut setting. Fits all Dremel rotary tools except Mini-Mite, MultiPro 7700, model 260 and Stylus.
60485
60717 1/16 INCH ROUTER, DRILL POINT (1/8 INCH SHANK)

This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 1/16 inch cutting diameter.
60717
60718 3/32 INCH ROUTER, DRILL POINT (1/8 INCH SHANK)

This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 3/32 inch cutting diameter.
60718
60719 1/8 INCH ROUTER, DRILL POINT (1/8 INCH SHANK)

This unique tool lets you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. 1/8 inch cutting diameter.
60719
60795 3-PIECE CARBIDE ROUTER DRILL SET (1/16 INCH DIA., 3/32 INCH DIA., 1/8 INCH DIA.)

These unique tools let you cut any shape in wood, plastic, glass, ceramic, aluminum, brass, fiberglass and almost any material except hard steel. Use for enlarging and shaping holes, scroll cutting, smoothing. Cuts its own starting hole and any shape in any direction tool is moved. 1/8 inch shank fits in any rotary tool. Made of solid carbide for 30 times longer life than steel. Carbide Router Drill Set includes: No.60717 1/16 inch cutting diameter, No.60718 3/32 inch cutting diameter and No.60719 1/8 inch cutting diameter.
60795
80245 FISH TAIL ROUTER, 1/32 INCH

Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long.
80245
80246 FISH TAIL ROUTER, 1/16 INCH

Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long.
80246
80247 FISH TAIL ROUTER, 3/32 INCH

Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long.
80247
80248 FISH TAIL ROUTER, 1/8 INCH

Long lasting carbide router bit with special 'fish tail' ends cuts smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shank makes it ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long.
80248
80254 4-PIECE FISH TAIL ROUTER SET

These long lasting carbide router bits with special 'fish tail' ends cut smooth, flat bottom holes in wood, hard plastic and fiberglass. 1/8 inch shanks make them ideal for use in the No.82033 Dremel Router or No.60485 Shaper Table Attachment. Can also be used in a drill press. Diamond pattern milled into side lets you smooth or shape edges of thin wood. 1-1/2 inches long. Router Bit Set includes one each of the following bits: 1/32 inch cutting diameter, 1/16 inch cutting diameter, 3/32 inch cutting diameter and 1/8 inch cutting diameter.
80254
82544 ROUTER BITS (SET OF 6)

Router bits for putting a decorative edge on wood and for making miniature molding. Use with Dremel rotary tool with shaper or router attachment. 1/8 inch shank.
82544
83152 DREMEL PLUNGE ROUTER ATTACHMENT

Use this Plunge Router Attachment with your rotary tool for edging, grooving, freehand routing and circular cuts. Includes spring-loaded rotary tool mounting plate with twin handles for accurate plunge routing. Features a quick-release depth stop, depth gauge, clear base for good visibility, 0 to 5 inch edge guide. Also cuts circles up to 11 inches in diameter. Fits Dremel models 275, 285, 300, 395, 398, 800, 400XPR and 4000.
83152


For your convenience, we accept VISA and MasterCard.

CreditLogos

Please note price and availability are subject to change.